TRH - Rotary Hanger Shot Blasting Machine
This 2-Hanger Rotary Type Shot Blasting Machine Type TRH (formerly known as IRH) is the preferred choice for customers that need to blast cast iron and aluminum castings. The workpieces can be conveniently loaded and unloaded by placing them on the hanger in the front section of the machine, while at the same time the other batch of workpieces are cleaned in the blasting area. Due to the fact that they are placed on hangers, damage to delicate workpieces will be prevented making this kind of machine the most suitable solution for the treatment of automobile and die-casting components.

  • Fully automated cleaning of workpieces
  • 100% blasting coverage of workpieces due to the spinning action of hanger
  • Machine tight sealed to ensure no abrasive leakage
  • Convenient loading and unloading of workpieces
  • High operator safety
  • Low noise level
  • Optional explosion proof dust collector

    • MODEL TYPE TRH-5A TRH-9RA
    Max. diameter of workpiece hanger [mm] 500 600
    Height of workpiece hanger [mm] 600 900
    Max. loading weight per hanger [kg] 50 80
    Max. single workpiece weight [kg] 10 15
    Average cycle time (e.g. die-casting workpiece) [sec] 60 60
    Number of blast wheels & capacity 2 x 7.5 Hp (5.5 Kw) 2 x 20 Hp (15 Kw)
    Air consumption 18 cfm at 6 bar 25 cfm at 6 bar
    Total power requirements 23 Hp (17.05 Kw) 56.5 Hp (42.4 Kw)
    Machine dimensions [mm] A 1500 1900
    B 2400 2700
    C 3800 4600





    Steel Shot

    Steel Grit


    Before

    After
    Before

    After
    Before

    After